Hitachi HDR5T01 Instruction Manual page 29

Problem
The LED indicator does not
glow.
No picture or sound.
Changes in the settings have not
taken effect.
T h e r e m o t e c o n t r o l i s n o t
working.
Information for Users in European Union Countries
The above mark is in compliance with the Waste Elektrical and Electro-
nicEquipment Directive 2002/96EC (WEEE). The mark indicates the requi-
rement NOT to dispose the equipment including any spent or discarded
batteries as unsorted municipal waste, but use the retum and collection
systems available. If the batteries or accumulators included with this
equipment display the chemical symbol Hg, Cd, or Pb, then it means that
the battery has a heavy metal content of more than 0.0005% Memcury, or
more than 0.002% Cadmium or more than, 0.004% Lead.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
Possible Reasons
Power Adaptor is not connected.
No signal or weak signal.
The set top box was unplugged
without first switching to standby
mode.
• The set top box is in standby.
• Remote control is out of range.
• Batteries are exhausted.
- 28 -
What To Do
Check if the AC adaptor is
plugged into the power socket.
Check the aerial and video
connections (scart).
Make sure that the box is in
standby mode before unplugging
it from the mains.
• Press the STANDBY button.
• Check that the remote control
range is clear.
• Replace the batteries with new
ones.