Configuring Timers - Hitachi HDR5T01 Instruction Manual

Note: Split programme information should be
broadcasted by the broadcaster.
Multiple/Alternative Timer Record
It is possible to record or set recording timers for two
individual events at the same time interval. If you set
more than two recordings at the same time, you will
see an error message.
INFO: Pressing this button, gives you detailed
information about the selected programme.
Record/Cancel: Sets recordings for the selected
programme. If you pres it again, the recording will
be cancelled.
OK: Pressing this button will save the latest changes
and you will leave this window and go back to the
EPG window.
Alternatives: If you press this button, you will get
alternatives for the programme which causes a
conflict.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
NOTE: A conflict is caused, if more than two
programmes are set for recording in the same time
interval. To solve this conflict, you have to select an
alternative for one of those programmes or cancel
one of the recording timers.
NOTE: If there is still a conflict and you leave this
menu by pressing the OK button, you will see this
warning message: "There are still conflicts!". A warning
triangle will appear nearby the programmes which
cause a conflict.

Configuring Timers

Select Timers from the main menu and press OK
button.
To add a timer, press the YELLOW button on the
remote control. Then "Add Timer" window appears.
- 16 -