Scan Encrypted; Receiver Upgrade; Parental Locking; Menu Lock - Hitachi HDR255 Instruction Manual

To save the recent changes and exit; press the MENU
button.

Scan Encrypted

Use" "/" " buttons to go to the Scan Encrypted
Channels option. Use " "/" " buttons to toggle YES
or NO the searching for encrypted channels.

Receiver Upgrade

Over Air Download (OAD): To ensure that your STB
always has the most up todate information. Please
ensure that after use it is set to its standby mode.
The STB automatically powers up at 3.00 A.M. each
day and searches for any new information which may
be broadcast and will download this to your receiver
automatically. This operation will normally take
approximately 30 minutes. If you have an important
recording to make at 3.00 A.M. which must not have
a 30 minutes interrupt then you can disable the auto
OAD search by performing the following:
• Press Menu button and using the " "/" " buttons to
choose Setup and press the OK button.
• Highlight Configuration menu with " "/" " keys and
pres OK.
• Use " "/" " buttons to choose "RECEIVER
UPGRADE" and press OK button.
• Using the left / right button change "Automatic
scanning" from Enabled to Disabled.
• Highlight "Scan for upgrade" menu with " "/" " keys
and press OK to commence upgrade.
Do not forget to re enable the automatic OAD function
after you have made your recording by repeating the
above instructions but this time selecting ENABLE.

Parental Locking

Use " "/" " buttons to go to Parental Lock option.
Press OK button to enter the menu. A box asking for
the lock key is displayed. The key is set to "0000"
initially. Enter lock key. If it is incorrect, "Wrong Pin"
is displayed. If it is correct, the Parental Control Menu
is displayed.

Menu Lock

In menu lock you can set locking for All Menus, or the
Installation Menu to restrict access to these menu's. If the
menu lock is disabled, there will be free access to the menu
system. Use " "/" " buttons to go to Menu Lock option.
Use " "/" " buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the
correct lock key.So the user can't add, delete, rename,
channels, can't set timers.
INSTALLATION MENU : Installation menu is locked.So
the user can't add channels. Changes will be updated after
exiting 'Configuration Menu'.

Set Pin

The PIN code of the unit changed. Use " "/" " buttons to
go to "Set PIN" option. Press OK to display the "Set PIN"
window. Use NUMERIC buttons to enter new pin number
you will need to input your new pin a second time for
verification purposes. If Both pin numbers are four digits
long and the same, the pin will be changed. The factory
default pin number is 0000, if you change the pin number
make sure you write it down and keep it safe.

Language

In this menu the user can adjust the preferred language.
Language is changed by pressing OK key.
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
English - 17 -