Master Bilt MPM-27 Specification Sheet

MPM-48
FEATURES
NEW
STANDARD TEXTURED FINISH
Standard Black also
white available
CONSTRUCTION
• 24 gauge painted textured steel inte-
rior and exterior
• Removable two tier stainless steel
display deck
• Stainless steel floor
• Full length 8 / " wide laminated
3
4
white formica counter top
• Front bumper guard
• Automatic defrost
• On/off power switch on
MPM-36 and MPM-48
• Cord and plug on MPM-36 and
MPM-48
• Black vinyl trim
• 2" foamed-in-place "zero ODP" ure-
thane insulation
REFRIGERATION
• Refrigerant: R-134a
• Front air intake and rear discharge
• Forced air ducted flow
• Self-contained, bottom mount refrig-
eration system
• Minimum of 6" clearance between
cabinet back and wall and a clear-
ance of 10" at top
• Temperature range:
34° to 41°F (1° to 5°C)
• R-factor (insulation efficiency rating):
17.24
• Slide-out refrigeration system
• Drain plumbing hookup recom-
mended. Condensate pan available
if there is no access to drain plumb-
ing. Condensate pan must be field
installed and requires a dedicated
15 amp, 120 volt circuit.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
MPM SERIES
Medium Temp
Open Display
Merchandisers
MODELS
❑ MPM-36
❑ MPM-48
❑ MPM-72
WARRANTY
• Standard limited three year
extended compressor and two year
limited parts and labor
OPTIONS
❑ Add suffix "SS" for stainless steel
interior and exterior
❑ Custom colors
❑ Night curtain kit (factory installed)
❑ Light kit (factory installed)
❑ Night curtain & light kit
(factory installed)
❑ Casters
❑ Sandwich racks
❑ Sandwich rack dividers
❑ Condensate evaporator drain pan
NOTE: Must be field installed and
requires a dedicated 20A, 120v
circuit.