Ricoh MP 2001L Operating Instructions Manual page 37

Placing custom size originals
When placing custom size originals on the exposure glass or in the ADF, specify the size of the originals
using the number keys.
• Originals that have a vertical length of 105–297 mm (4.2"–11.6") and a horizontal length of
128–1260 mm (5.1"–49.6") can be specified.
• For 2-sided originals, the horizontal size is 128–432 mm (5.1"–17").
1. Select the paper tray using the [ ] or [ ] key, and then press the [ ] key.
2. Select [Custom Size] using the [ ] or [ ] key, and then press the [OK] key.
• When [Auto Detect] is selected, the size of the placed original will be detected automatically.
3. Enter the horizontal size of the original using the number keys, and then press the [OK]
key.
• If you make a mistake, press the [Clear/Stop] key, and then enter the value again.
Placing Originals
35