1.
Press the [Combine/Series] key.
2.
Select the combine mode using the [ ] or [ ] key, and then press the [OK] key.
3.
Select the orientation using the [ ] or [ ] key, and then press the [OK] key.
• You can select the orientation of originals and two-sided copying paper when [Always
Specify] is specified for [Orientation] under [Copier Features] (User Tools). See page 90
"Orientation". If it was not specified for, proceed to step 5.
4.
Select the orientation [Top to Top] or [Top to Bottom] using the [ ] or [ ] key, and then
press the [OK] key.
• To change the copy orientation, select the original icon whose orientation is that required. See
page 58 "Original orientation and completed copies".
The "Programmed" message appears.
CUA114
Copier Functions
65