Adjusting The Bottle Rack; Removing And Replacing The Fruit And Vegetable Drawer - Miele KFN 37452 iDE Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the bottle rack

The bottle rack can be placed at differ‐
ent positions in the appliance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre‐
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
42
Removing and replacing the
fruit and vegetable drawer
Fruit and vegetable drawer is on tele‐
scopic runners and can be removed for
filling, emptying or cleaning purposes.
 Pull out the drawer as far as it will go,
and then lift it up and out.
Push the runners back in again to
avoid damaging them.
Replacing the drawer
 Push the runners in completely and
then place the drawer on them.
 Push the drawer into the appliance
until it clicks into position.