Adjusting The Bottle Rack; Perfectfresh Pro Zone Compartments - Miele KFN 37682 iD Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the bottle rack

The bottle rack can be placed at differ‐
ent positions in the appliance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre‐
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
44
PerfectFresh Pro zone com‐
partments
The compartments in the PerfectFresh
Pro zone are on telescopic runners, and
can be removed for filling, emptying or
cleaning purposes.
Remove the bottle shelf from the door
to make it easier to take out the com‐
partments.
 Pull the drawer out as far as it will go.
 Holding the sides of the compart‐
ment at the back, lift it up and then
forwards and out.
Push the runners back in again to
avoid damaging them.
 Carefully pull out the lid between the
compartments slightly, and lift it
down and out.