Adjusting The Bottle Rack - Miele KFNS 37432 iD Operating Instructions Manual

Adjusting the interior fittings
Stops prevent the shelves from being
pulled out accidentally.

Adjusting the bottle rack

(depending on model)
The bottle rack can be placed on
different levels in the appliance.
^ Raise the rack, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The rear stopping bar must be raised to
prevent the bottles touching the rear
wall.
The bottle rack has stoppers at the
sides to prevent the rack being pulled
out unintentionally.
42
Fruit and vegetable drawer
(depending on model)
The fruit and vegetable drawer sits on
telescopic runners and can be
removed for the purposes of loading
and unloading, or cleaning.
^ Pull out the drawer as far as it will go,
and then lift it up and out.
Push the runners back in again to
avoid injury or damage.
Inserting the fruit and vegetable
drawer
^ Place the drawer on the fully
retracted telescopic runners.
^ Push the drawer into the appliance
until it clicks into position.