Switching On And Off; Before Using For The First Time - Miele KFN 37452 iDE Operating And Installation Instructions

Switching on and off

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a lay‐
er of protective foil to prevent scratch‐
ing during transportation.
 Carefully remove the protective foil
from the stainless steel trim.
Cleaning and care
Please refer to the relevant instruc‐
tions in "Cleaning and care".
Tip: We recommend treating stainless
steel surfaces with Miele stainless steel
conditioning agent immediately after re‐
moving the protective foil, (see "Guide
to the appliance - Optional accesso‐
ries").
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellant
protective coating.
 Clean the inside of the appliance and
the accessories.
 Clean the ice cube maker: after se‐
lecting the "Rinse ice cube maker"
setting the ice cube maker and the
water supply pipework will be rinsed
automatically.
20
Accessories
- Bottle holder
The flexible ribs grip the bottles secure‐
ly when the door is opened and closed.
 Attach the bottle holder centrally
along the rear edge of the bottle
shelf, as shown.
- Cool pack
 Place the cool pack in the top freezer
drawer.
The cool pack will be at its most effec‐
tive after it has been in the freezer for
approx. 24 hours.