Installing the appliance
Carry out the following steps on both
doors.
A gap of 8 mm is set ex-works be‐
tween the appliance door and the fix‐
ing bracket. Double check this gap
and reset it if necessary.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the
same height as the upper edge of the
furniture door being fitted (see on
the diagram).
100
Tip: Push fitting aids together with
the furniture front up to the height of the
adjoining unit furniture doors.
Undo nuts and take fixing brack‐
et off together with fitting aids .