Punch Module Specifications (For Finisher); Printer Specifications - Sharp MX-2301N Safety Manual

SPECIFICATIONS

Punch module specifications (for finisher)

Model
Hole punching
Allowed paper sizes for
punching
Punchable paper weights
Power supply
Dimensions
Weight

Printer specifications

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 Supported operating systems are Windows 2000 / XP / Vista.
14
MX-PNX1A MX-PNX1B
2 holes 2 holes or 3 holes
A3, B4, A4, A4R, B5, 2 holes:
B5R, 11" x 17", 8-1/2" x 14",
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 13", 8-1/2" x 11"R,
8-1/2" x 11", 7-1/4" x 10-1/2"
8-1/2" x 11"R, 3 holes:
7-1/4" x 10-1/2", 8K, 11" x 17", 8-1/2" x 11",
16K, 16KR A3, A4
2 2
55 g/m to 128 g/m (16 lbs. to 32 lbs.)
Supplied from finisher
105 mm (W) x 518 mm (D) x 170 mm (H) (4-9/64" (W) x 20-25/64" (D) x 6-45/64" (H))
Approx. 3.5 kg (7.7 lbs.)
Built-in
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
600 x 600 dpi
PCL6, PostScript 3 compatible*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
See "VERIFYING SYSTEM REQUIREMENTS" in the Safety Guide / Software Setup Guide.
PCL6
1
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
Standard system memory: 512 MB
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
MX-PNX1C
4 holes
A3, A4
1
1
80 European fonts, 28 barcode fonts*
136 European fonts
3
MX-PNX1D
4 holes, broad width
A3, B4, A4, A4R, B5,
B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
7-1/4" x 10-1/2"
2
, 1 bitmap font