Sharp MX-2301N Safety Manual page 11

Machine specifications / copier specifications (Continued)
Bypass tray
Duplex module
Output tray (Center tray)
Interface port
Required power supply
Power consumption
Dimensions
Weight
Overall dimensions
* Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors);
however, the connectors cannot be used simultaneously. Only one of the connectors can be used. If you need to change the
connector that is used, contact your service technician.
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed
500 mA.
Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size
detection function. Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is
possible.)
Paper weights:
2
Thin paper (55 g/m to 59 g/m
28 lbs.)), heavy paper (106 g/m
2
envelopes (75 g/m to 90 g/m
Paper capacity: Standard paper 100 sheets
Paper types:
SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper,
transparency film, envelopes (Monarch, Com-10, DL, C5)
Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Paper weight: Plain paper (60 g/m
2
209 g/m (28 lbs. bond to 110 lbs. index))
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper
Output method: Face-down output (A3W and 12" x 18" paper can be output to right tray, or finisher)
Output capacity: 500 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor: Yes
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Type A connector supports USB 2.0*
Compatibility requirements of USB memory
Memory capacity : Max. 32 GB
Disk Format
Type B connector supports USB 2.0 (Hi speed)
Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of
the left side of the machine.)
220-240V: 1.84 kW / 100-127V: 1.44 kW
620 mm (W) x 670 mm (D) x 950 mm (H) (24-13/32" (W) x 26-3/8" (D) x 37-25/64" (H))
Approx. 116 kg (255.8 lbs.)
970 mm (W) x 670 mm (D) (38-3/16" (W) x 26-3/8" (D)) (when bypass tray is extended)
2
(15 lbs. to 16 lbs.)), plain paper (60 g/m
2 2
to 256 g/m (28 lbs. bond to 140 lbs. index)),
2
(20 lbs. to 24 lbs.))
2 2
to 105 g/m (16 lbs. to 28 lbs.)), heavy paper (106 g/m
: FAT32 only
SPECIFICATIONS
2 2
to 105 g/m (16 lbs. to
2
to
9