Finisher Specifications - Sharp MX-2301N Safety Manual

Finisher specifications

Model
Paper sizes
Paper weight
Modes
Allowed paper sizes for
offset
Offset distance
1
Tray capacity*
Power supply
Dimensions
Weight
Overall dimensions when
attached to machine
Stapler section
Allowed paper sizes for
stapling
Maximum number of
5
sheets for stapling*
*1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*2 Up to 10 envelopes can be output.
*3 The height of the sheets must not exceed 71 mm (2-51/64").
*4 The height of the sheets must not exceed 35.5 mm (1-13/32").
*5 The maximum number of sheets for stapling assumes a paper weight of 90 g/m
2 2
106 g/m to 256 g/m (28 lbs. bond to 140 lbs. index).
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.
MX-FNX9
A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 8K, 16K, 16KR
2
Thin paper (55 g/m to 59 g/m
2
heavy paper (106 g/m to 256 g/m
(20 lbs. to 24 lbs.))
Non-staple, staple
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K
30 mm (1-3/16")
2
Non-stapling* :
3
500 sheets* (A4, A4R, B5, B5R, A5R,
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 16K, 16KR)
4
250 sheets* (A3W, A3, B4, 12" x 18", 11" x 17",
8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K)
Supplied from the machine
440 mm (W) x 595 mm (D) x 205 mm (H) (17-21/64" (W) x 23-27/64" (D) x 8-5/64" (H))
(When tray is folded up)
Approx. 13 kg (28.7 lbs.)
1060 mm (W) x 670 mm (D) (41-23/32" (W) x 26-3/8" (D)) (When tray is extended)
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K, 16KR
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two
staples.)
50 sheets (A4, A4R, B5, 8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR)
30 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8K)
(30 sheets when the sheets are the same width but different lengths.)
2
(15 lbs. to 16 lbs.)) plain paper (60 g/m
2
(28 lbs. bond to 140 lbs. index)) , envelopes (75 g/m
Stapling*
30 sets or 500 sheets*
8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR)
30 sets or 250 sheets*
8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K)
2
(24 lbs.) and includes two cover sheets of
SPECIFICATIONS
2 2
to 105 g/m (16 lbs. to 28 lbs.))
2
to 90 g/m
5
:
3
(A4, A4R, B5,
4
(A3, B4, 11" x 17",
2
13