Call Mailbox (Menu 1); Messages (Menu 2); Write Now (Menu 2 1); Send (Menu 2 1 1) - Globalstar Telit SAT-550 User Manual

Sat phone
Table of Contents

Advertisement

The following pages list the menu func-
tions available together with a brief de-
scription of each. To access these func-
tions, refer to the section on using the me-
nu.
In messages only, the two keys -sm- per-
form additional functions according to the
symbol located above the key:

enlarge message
answer incoming message or update
previous message
enter message
enter telephone number

Call mailbox (Menu 1)

This function (if supplied by the network)
enables you to listen to voice mails stored
in a specific mailbox. The telephone calls
the number stored in this menu after

is pressed.
The number of the mailbox must be sup-
plied by the network operator.
Messages (Menu 2
Write new (Menu 2 1)
This function enables you to enter the
message first (max.160 characters) and
then the telephone number to call (which
is requested if not stored in parameters
specified in section Parameters 2 4 be-
low).
The characters are entered as described
for entering names in the phone-book.
Press
to define and store user messa-

ges (after pressing

Press
to enter the message, and

to enter the number to be called.
)
).
To enter a series of numbers after ente-
ring a message, press
after which
is displayed.

Send (Menu 2 1 1)

This function sends the message.

Store (Menu 2 1 2)

This function stores the message without
sending.

Send and store (Menu 2 1 3)

This function sends and stores the mes-
sage.

Parameters (Menu 2 1 4)

This function enables immediate access
to the parameters sub-menu (2 4) descri-
bed below.

Received (Menu 2 2)


On receipt of an SMS message, the sym-
bol
is displayed and an acoustic signal
is activated.
Messages can now be read.

To scroll through messages, press
and
; the same keys can be used to
scroll through a long message following
enlargement (by pressing
Press
(before enlarging the message)
to display the number of the Service Cen-
tre that has transmitted the message.
To delete a message, press
cond and then confirm the request.


for one second
).
for 1 se-
(QJOLVK

Advertisement

Table of Contents
loading

Table of Contents