Table of Contents
Advertisement
Switching on
M
Press and hold key
telephone. If the message PIN
splayed enter the code (supplied with the
SIM card) and press the left key
¨
The telephone can only receive calls
when switched on with an active SIM card
and in a zone covered by the terrestrial
GSM or Globalstar satellite network.
N
If necessary, change the display lan-
guage by pressing
Switching off
Press and hold key
Access codes
The telephone and SIM card use different
access codes to prevent unauthorised
use. When the relative request is di-
splayed, enter the code (displayed as a
series of asterisks) and press
the event of an error, erase single digits
by pressing
as required.
(QJOLVK
6. MAIN FUNCTIONS
to switch on the
:
is di-
or
5 3.
for 2 seconds.
. In
Security code (6 digits)
The security code, 000000 programmed
by the manufacturer, enables access to
the Phone Security (6 2) sub-menu.
PIN and PIN2 codes (from 4 to 8 digits)
The PIN (Personal Identity Number) is
supplied with the SIM card and serves to
protect use of the telephone.
If the request for the PIN code is di-
splayed, enter the code and press
or
If three consecutive errors are made
when entering the PIN, the SIM card is
blocked and cannot be used. Use the
PUK code to change the PIN code of the
blocked SIM card.
The PIN2 code, which has to be assigned
by the network operator, is required for
access to specific functions regarding
protected fixed dialling numbers (FDN)
and unit meters which require insertion of
the SIM card.
Advertisement
Table of Contents
