Clock (Menu 4)
Set (Menu 4 1)
This function sets the following in sequen-
ce: clock (displayed at the top right of the
display) and, after its confirmation, date.
In both cases, press
one item to the other.
Later this function sets the day: select the
required day by pressing
firm.
Alarm (Menu 4 2)
This function sets the alarm-clock and the
days for activation. After setting and con-
firming the time, use
lect the required items (press
enable and a second time to disable the
selection) and, on completion of selection
(s), confirm.
Note:
:
The symbol
next to selection means
that it is enabled; the alarm-clock will be
activated even if the phone is switched
off: in this case, following activation, con-
firmation is requested or the option to
reject activation: the telephone switches
off automatically if no key is pressed.
to pass from
and con-
and
to se-
to
Settings (Menu 5)
Audio (Menu 5 1)
This function enables you to change the
tone and volume of the ring signal.
Personalising the ring signal
To personalise the ring signal, enter sub-
menu (5 1 1 1 followed by keys
up to 9) and, after pressing
enter the required notes (max.80 inclu-
ding pauses), then confirm.
¨
the composition of a note requires its
specific entry, the sharp sign (if relevant)
and its duration.
¨
press the same key again to change the
letter from upper to lower case thereby
changing the octave (higher frequency).
¨
the sharp sign must be entered imme-
diately after the relative letter.
¨
the duration of the note can be extend-
ed by pressing the relative key (9) repea-
tedly (up to four times).
¨
the duration of the pause can be ex-
tended by pressing the relative key (0) re-
peatedly (up to four times).
¨
scroll through items by means of keys
and
.
¨
errors are displayed by a flashing cursor
at the point of the error.
¨
press
composed.
to listen to the melody
(QJOLVK
or
,