Puk And Puk2 Codes (8 Digits) - Globalstar Telit SAT-550 User Manual

Sat phone
Table of Contents

Advertisement

PUK and PUK2 codes (8 digits)

The PUK (Personal Unblocking Key) code
is supplied with the SIM card.
This code is required to modify a blocked
SIM card.
The PUK2 code, supplied by some SIM
cards, is required to modify or unblock
PIN2.
For further information, contact your net-
work operator.
Phone lock password
This comprises a 4-digit password reque-
sted only by the network service to block
calls. It is provided by the network opera-
tor or service provider on subscription to
the service.
How to make a call
Enter the number with area code and
press
.
During an outgoing call information on the
calling status is displayed and at the end
of it its duration and cost.
Note: the cost displayed is either tran-
smitted by the network or calculated by
the telephone on the basis of the data en-
tered. (Menu 8 3 3)
International calls

Press and hold
.
The character + is displayed. Enter the
international code for the required coun-
try, the area code without the leading zero
(for Italy with zero), the number and press
.
Automatic redial
When the dialled number is engaged a
request message is displayed after which
you can press
redial function which attempts to redial the
number automatically ten times.
Note: to reject this function immediately
or later (during call attempts) press
Correcting dialling errors
Erase the last character on display by
pressing
. To erase the entire line press
and hold
.
Recalling from the phone-book
Refer to the chapter 8. Using the phone-
book: for information on storing a telepho-
ne number with associated name.
Repeating the last dialled number
If characters are on display, cancel by
pressing
and then press
ward the call to the last called number;
otherwise scroll
the requested number (among the twenty
available) and press

to enable the automatic
twice to for-

or
to position on
to forward the call.
(QJOLVK
.

Advertisement

Table of Contents
loading

Table of Contents