Table of Contents
Advertisement
How to make the first call
M
Insert a valid SIM card while the tele-
phone is switched off.
Refer to chapter 4. Inserting the SIM card.
N
Connect the battery.
Refer to chapter 4. Connecting the batte-
ry.
O
Connect the telephone to the battery
charger to charge the battery.
Refer to chapter 5. Charging the battery.
The telephone can be used during rechar-
ging but the procedure will take longer.
P
Press
for a few seconds to switch on
the telephone. If the message PIN
splayed, enter the PIN code supplied with
the SIM card and press
The telephone sets the display text lan-
guage automatically, according to the in-
formation on the SIM card.
To change the display language, refer to
chapter 9. Menu functions - Settings
(Menu 5) - Language (Menu 5 3).
To change the connection mode between
the terrestrial GSM and the Globalstar sa-
tellite network. Refer to chapter 10. Satel-
lite Menu - Mode (Menu 1).
Note: negative symbols (e.g.
on the third line of the display.
3
When the name of the SIM card provi-
der is displayed, enter the area code and
the telephone number and press
(QJOLVK
2. QUICK STARTING GUIDE
: :
is di-
or
.
) appear
.
How to receive the first call
M
Ensure that the telephone is switched
on and in a zone with radio signal covera-
ge to receive an incoming call which ap-
pears on the display and is indicated by a
ring signal.
Note: the ring signal can be rapidly sup-
pressed.
To activate/deactivate this function press
for one second: a confirmation messa-
ge is displayed.
This function is temporary in that it is not
stored in the memory when the telephone
is switched off; to activate the function
permanently, refer to the menu functions.
N
Press
to answer and then
end of the call.
Satellite communications
Please refer to the previous page for the
correct use of the antenna in this mode.
Personalising the menu
Access to the sub-menus and settings
used most frequently can be simplified
considerably by using the personalisation
function.
To personalise the menu, refer to chapter
9. Menu functions - Personalising the me-
nu.
Note: sub-menus and settings can be
personalised but not menus 0-9 which
appear after pressing
at the
Advertisement
Table of Contents
