Call Options - Globalstar Telit SAT-550 User Manual

The phone features a wide range of func-
tions that can be used during a call. For
access to these functions, press and hold

. The options available are listed below
(depending on the type of service you are
subscribed to).
Note: the list has been sorted in chronolo-
gical order of incoming and/or outgoing
calls.
Accept call
Accepts incoming call putting the call in
progress on hold.
Switching to call wait
Enables you to resume conversation with
the call previously put on hold and sends
the current conversation to call wait sta-
tus.
Reject call
Terminates the call on hold.
Hold/Resume
Enables you to put a call or conference on
hold and make a new call. At the end of
the new call the previous conversation
can be resumed by selecting Resume.

7. CALL OPTIONS

Disconnect
Ends the selected conversation.
Join/Divide
This function enables you to make a con-
ference call with up to six persons.
Select the option Join Conf. to add a
new participant in the conversation.
For one-to-one conversations during a
conference call, move the bar to Divide
at the required number.
Sending DTMF tone signals
DTMF signals enable communication with
answer machines, computerised telepho-
ne systems, etc. Dial the required num-
ber, select the send DTMF option, enter
the required sequence and press
Note: DTMF tones are active until disa-
bled manually (Menu 5 1 5) and therefore
can be sent by simply pressing the corre-
sponding key without accessing the speci-
fic menu.
Number information
Various items of information are available
for a call in progress; move the cursor bar
to the required item and press


.

.
(QJOLVK