Table of Contents
Advertisement
Answering a call
When a call is received, the ring signal is
activated and the message >>>CALL<<<
flashes on the display. If the caller can be
identified, the telephone number (or name
if previously stored in the phone-book) is
also displayed.
Press s to answer,
ringer or
to reject the call.
Press
at the end of the call.
Automatic answer
If this function is enabled (Menu 5 4) inco-
ming calls are answered automatically af-
ter approximately 6 seconds.
Any key to answer
If this function is enabled (Menu 5 5) inco-
ming calls can be answered by pressing
any key (except
Changing the speaker volume
The telephone speaker volume can be
adjusted by means of the keys
(increase) and
(decrease) during con-
versations only; press for one second to
modify.
Microphone on/off
Press
for one second (during conver-
sation only).
to silence the
).
Protecting the keypad
The keypad can be protected to prevent
accidental key action (including
To lock the keypad with the display emp-
ty, press and hold
To unlock the keypad, press the same
key followed by
If the automatic keypad lock function is
enabled (Menù 5 7) the keypad is locked
automatically thirty seconds after a key is
pressed.
Note: emergency calls can still be made
when the keypad lock is enabled.
In the case of a broadcast message the
symbol (
) indicating the lock is no longer
visible but a message indicating the lock
is displayed whenever a key is pressed.
Autolock
If this function is enabled (Menu 6 2 4)
press
for one second to lock the pho-
ne. Press
to start the unlock procedure
and enter the three-digit code (manufacturer
setting is 1 2 3).
Erasing credit unit
To erase from the display the total credit
units, press
.
).
.
.
(QJOLVK
Advertisement
Table of Contents
