Call Control (Menu 8); Minute Beep (Menu 8 1); Call Duration (Menu 8 2); Charge Rate (Menu 8 3) - Globalstar Telit SAT-550 User Manual

Sat phone
Table of Contents

Advertisement

Call control (Menu 8)

Minute beep (Menu 8 1)

This function activates a beep every mi-
nute during an outgoing call to indicate
duration.

Call duration (Menu 8 2)

This function registers the duration of the
last outgoing call, all incoming national
and international calls, all outgoing calls
(national and international) and total con-
versation time. This last function also re-
quests confirmation to clear all timers.

Charge rate (Menu 8 3)

This network service displays the charge
for the last call (and all calls) as well as
the corresponding number of units.
If the PIN2 is also entered, this function
enables you to set the value and currency
of a single unit, reset the units counter
and restrict it to a pre-set number.
Note:
The value, currency and the duration in
seconds of a single unit can only be set if
Local is displayed on the last line of the

function COST CONTROL.

Use
to move from one item to anot-
her and confirm.
Transfer own number (Menu 8 4)
This network service enables (for all calls)
to transmit or retain (leaving the opera-
tor's settings unchanged) your own tele-
phone number to the display of the tele-
phone called. The subsequent functions
enable (or not) the option to transmit the
number for each single call.

Closed User Group (Menu 8 5)

If this function is offered by the network
operator to the subscribers of this service,
it enables you to make calls only to one or
more defined user groups.
You have to dial and confirm into the in-
dex the code number of the user groups
assigned by the network operator.
If activated, the other two sub-menus are
used to inhibit calls to users of a different
group than the one indicated as preferred
(a message will be shown in the last row
of the display), as far as Suppress CUG is
concerned, and to inhibit calls to users
out of the selected user group, as far as
Suppress OA is concerned.
Note: If calls are made out of your own
user group, you have to dial the code of
the new user group into the index.

Network Identity Time Zone (Menu 8 6)

If this function is offered by the network
operator to the subscribers of this service,
it enables you to display the effective local
time of the place where you are, without
changing the settings of the relevant m enu.

(QJOLVK

Advertisement

Table of Contents
loading

Table of Contents