Changing Tools [3] - Festool VECTURO OS 400 EQ Instruction Manual

Changing tools [3]

CAUTION
Hot and sharp tools
Risk of injury

Do not use insert tools that are blunt or defec-
tive.

Wear protective gloves.
CAUTION
Tools that are not supplied or recommended by
Festool.
Damage to machine caused by increased vibra-
tion load
Risk of injury and harm to health

Always use original Festool tools.
Sharp edges! Carefully remove protective
resin from the cutting edge of new insertion
tools!

Push in the fastening element [3-1] firmly up to
the stop.

Close the clamping lever [3-2].
Avoid pinching hands and fingers when se-
curing the clamping lever! The spring force
causes the clamping lever to snap back into
position rapidly.
 The tool can be offset in 30° increments and se-
cured in the most effective working position.
3
3-1
2
3-2
180°
1
4
3
5
180°
11