Programmable Features - Jeep 2016 Wrangler User Manual

ELECTRONICS

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC)
The EVIC can be used to program the following Personal Settings. Push the MENU
button until Personal Settings displays, then push the DOWN arrow button
scroll through the settings. Push the RIGHT arrow button
• Language
• Auto UNLK On Exit
• RKE Unlock
• Sound Horn With RKE Lock
• Flash Lamp With Lock
• Headlamp Off Delay
• Headlamps With Wipers
• Key-Off Power Delay
Key Fob Programmable Features
The following features may also be programmed by using the Key Fob transmitter or
the ignition and driver's door lock switch. Refer to "Uconnect Settings" in "Under-
standing Your Instrument Panel" in the Owner's Manual on the DVD for further
information.
NOTE:
Pushing the LOCK button while you are inside the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause
the alarm to sound. Push the UNLOCK button to deactivate the Vehicle Security
Alarm.
Flashing Lamps With Lock
The turn signal lights flashing, when the doors are locked or unlocked, feature can be
turned on or off. To turn this feature on or off:
• Push and hold the UNLOCK button for at least 4 seconds, but no longer than 10
seconds. Then, push and hold the LOCK button while still holding the UNLOCK
button.
• Release both buttons at the same time.
88
to change the setting.
• Illumin Approach
• Hill Start Assist (HSA)
• Display Units of Measure In
• Nav – Turn by Turn
• Display Fuel Saver
• Compass Variance
• Calibrate Compass
to