Table of Contents
Advertisement
Available languages
Available languages
Snooze Alarm Function :
- Slide the "ALARM,ANOOZE NO/OFF" (B6) switch to ON to switch on the alarm. "
appears on the display
- Slide the "ALARM,ANOOZE NO/OFF" (B6) switch to SNOOZE to switch the snooze
alarm. "Zz" appears on the display.
- Press SNOOZE/LIGHT (B5) when alarm alerts. The alarm snoozes for 4 minutes, then it
alerts again. "Zz" flashes on the LCD during the snooze time.
- Simply press other buttons or slide "ALARM,ANOOZE NO/OFF" (B6) switch to OFF to
stop snooze alarm.
Thermometer:
- Press "°C/°F" button (B4) to select indoor Temperature in Celsius mode/ Fahrenheit
mode.
Back Light:
- Press SNOOZE/LIGHT (B5), back light states for 3 seconds
- Back light states for 3 seconds when alarm alerts
Notes:
- All function keys do not work when the radio signal is being scanned
- If the unit does not work properly, please take off the batteris. Wait a few second for the
all display turn off. Insert batteris again. The unit will reset.
- Avoid placing the clock near interference sources/metal frames such as computer
monitor or TV sets
- Placing the clock closer to a window/towards the general direction of the Transmitter.
The signal is weaker in basement
- Never use the clock in bathroom or any other area with high humidity
- The operating temperature of the clock is 0 C – 50 C
- The clock loses its time information when the battery is removed
CZ -
"
Advertisement
Table of Contents
