Troubleshooting - Broaster 2000 Installation And Operation Manual

Complaint
Timer and ignition systems
won' t work.
Timer works but elec-
trodes(s) won' t spark.
Electrodes spark but main
burners won' t ignite
Burner(s) remain in LOW
mode when selector switch is
on HIGH.
One or more electrodes will
not spark.
Product not done.
Smoke escaping from stacks
on top of unit.
Manual #13799 5/97

6 - TROUBLESHOOTING

Cause
1. Selector switch OFF.
2. Fuse blown.
1. No power to ignition
boards.
2. Ignitor board(s) faulty.
1. Main gas supply OFF.
2. Gas regulator closed.
3. Faulty control board.
4. Gas solenoid faulty.
1. Faulty solenoid.
2. Faulty burner relay.
1. Ignitor board in lock-out
mode.
2. Ignitor board faulty.
3. Electrode(s) faulty.
1. No oil or low oil level in
drip pan.
1. No oil or low oil level in
drip pan.
6 - 1
Remedy
1. Turn main power ON.
2. Replace fuse.
1. Turn selector switch OFF.
Contact service person.
2. Turn selector switch OFF.
Contact service person.
1. Turn ON.
2. Turn selector switch OFF.
Contact service person.
3. Turn selector switch OFF.
Contact service person.
4. Turn selector switch OFF.
Contact service person.
1. Turn selector switch OFF.
Contact service person.
2. Turn selector switch OFF.
Contact service person.
1. Turn selector switch OFF
for 1 minute then to HIGH.
2. Turn selector switch OFF.
Contact service person.
3. Turn selector switch OFF.
Contact service person.
1. Fill drip pan to overflow
level with cooking oil.
1. Fill drip pan to overflow
level with cooking oil.