System Setup - THOMSON THC300 User Manual

If By Channel is selected, use pqtu to select Channel No Symbol Rate and Scan QAM.
If Network Search is set to On, all channel belonging to the network of your operator
will be found, according to NIT information provided in the signal of the operator.
If By Frequency is selected, use pqtu and 0 ~ 9 to select Frequency, Symbol Rate
and select the correct ScanQAM parameter. Highlight Search and press Ok to start
scanning. Newly found channels will be added to the channel list.
If Network Search is set to On, all channel belonging to the network of your operator
will be found, according to NIT information provided in the signal of the operator.
nOTe:
7.2.2 Auto scan
Use pq to select Installation and press Ok or u to advance.
Select Auto Scan with pq and press Ok to enter.
Select your country and network base channel.
When FTA Only is set to Yes, scrambled channels won't be stored in the channel list. Use
pq to highlight Search. Now press Ok to start auto scan.
The receiver will store all found channels in the channel list.
nOTe:
7.2.3 Lcn (Logical channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by
the operator, channels will be stored in an operator defined order. Set LCN to On to
activate operator defined channel numbering or Off to store channels in found order.
This function only applies when a new channel search is performed.

7.3 system setup

This menu allows you to manage the system settings of your receiver. It consists of the
following sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental
Lock, OSD Setting and Auto Standby.
Press pq to highlight the menu of choice and press Ok advance to the next screen.
Use pq to move the highlight to the setting of choice. Values can be changed with
tu. Press eXiT to leave.
P16
MAin Menu
Obtain technical data about your cable-operator base channel
from your operator and start a network search from there to
find all channels belonging to the network.
Obtain technical data about your cable-operator base channel
from your operator and start a network search from there to
find all channels belonging to the network.