Timeshift; Epg (Electronic Programme Guide); Instant Recording - THOMSON THC300 User Manual

*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.

6.6 Timeshift*

Timeshift allows you to pause live broadcasts and resume playback later. To activate
this function set the Timeshift mode in the DVR Setting menu to on by selecting Pause.
For details, see 7.6.3. Press 2 in viewing mode to activate Timeshift. The progress
information banner appears on screen. Live TV keeps playing for moment and will then
pause. Press u to resume Timeshifted playback. Press 3 to return to live TV.
nOTe:
*This user manual describes the full functionality including the recording function and may not be applicable if the
PVR software has not yet been installed.

6.7 ePG (electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event
schedules and programme information and to mark events/movies for recording. To
access the EPG, press the ePG button in viewing mode. Use pq to select a channel
and tu to select an event. Press Ok to display detailed information of the selected
event. Use eXiT to quit the detailed information screen. Press ReD to access further
step functions. Use tu to select a step and Ok to execute it. Press eXiT to quit the
step function. Press GReen to set a timer for a selected event. Refer to section 7.3.4 for
details of the timer function.
nOTe:

6.8 instant Recording*

Your new receiver allows you to make an instant recording of the programme you are
watching. Simply press RecORD to start the recording. To enter the duration for the
recording, press RecORD again. Use the 0~9 buttons to enter the recording time and
press Ok to confirm.
At the beginning of the recording a recording sign will be shown for a short while on
the upper left corner of your TV screen. To stop the recording, press 3. Select Yes and
press Ok again to stop the recording. It is possible to make 2 recordings at the same
time if they are broadcasted on same frequency.
You can access the Record Manager via the FiLe button, and select Record by pressing
the button 1.
P12
OPeRATiOn
Timeshift and its playback only work properly when a fast
USB storage device such as a USB2.0 HDD is connected to
the receiver. Timeshift and playback of HD content requires
sufficient read/write speed of the used USB storage device.
Availability of EPG data depends on the broadcast.