Connecting To Tv With Scart Cable; Connecting To A Digital Audio Amplifier With S/Pdif; Connecting To A Digital Audio Amplifier And Tv Using Hdmi; Connecting A Usb Storage Device - THOMSON THC300 User Manual

3.3 connecting to Tv with scART cable

Your receiver is also equipped with a SCART connector; alternatively, the TV set can be
connected to the receiver using a good quality SCART cable.

3.4 connecting to a Digital Audio Amplifier with s/PDiF

By connecting your receiver to a digital amplifier or home theatre system, you can
enjoy the best possible sound quality and multi-channel audio (depending on the
broadcast). Connect your Digital Audio Amplifier or home theatre system with a
suitable cinch cable to the S/PDIF connector on the back of the receiver.

3.5 connecting to a Digital Audio Amplifier and Tv using hDMi

By connecting your receiver to the latest digital amplifiers or Home Cinema systems
you will enjoy the best possible sound quality and multi-channel audio (depending on
the broadcast). Connect the HDMI output of the receiver to an input of your amplifier,
and then connect the HDMI output of the amplifier to your TV set. Select the correct
input on your amplifier to watch and listen to programmes.

3.6 connecting a usb storage device

Connecting a USB device to the unit allows you to playback multimedia files. See
chapter 7.5.1. Mediaplayer.
nOTe:
nOTe:
*This user manual describes the full functionality including the recording function and may not be applicable if the
PVR software has not yet been installed.

4.0 sTARTinG uP FOR The FiRsT TiMe

When you use your receiver for the first time, the Welcome menu appears. Use pq to
move the highlight to the setting you wish to alter and use tu to change values. Start
P8
sTARTinG uP FOR The FiRsT TiMe
It is recommended to use USB 2.0 storage devices or higher for
playback of TV programmes or HD movies.
Timeshift/recording and playback only works properly when a
fast USB storage device such as a USB2.0 HDD is connected to
the receiver. Timeshift/recording and playback of HD content
requires a sufficient continuous read/write speed of the used
USB storage device.*
Fig. 6
Fig. 6
Fig. 7
Fig. 8