Miele KFN 37432 iD Operating And Installation Instructions page 69

Switching off Demo mode
The  symbol is lit up in the display.
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperatures ( or ) repeatedly un‐
til the  symbol flashes.
 Touch the OK sensor to confirm your
selection.
1 flashes in the display (means: Demo
mode is switched on) and the  symbol
lights up.
Information for dealers
 Touch the  or  sensor until 0 ap‐
pears (means: Demo mode is switch‐
ed off).
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the
 symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set‐
tings mode automatically after ap‐
proximately one minute.
Demo mode is switched off, the  sym‐
bol goes out.
69