Temperature And Door Alarm; Temperature Alarm; Switching The Temperature Alarm Off Early - Miele KFN 37432 iD Operating And Installation Instructions

Temperature and door alarm

The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if the door is left open.

Temperature alarm

If the temperature in the freezer section
becomes too warm, the sensor for the
freezer section will flash and at the
same time the alarm symbol  will
flash in the display. An alarm will also
sound.
The temperature the appliance is set at
determines the temperature the appli‐
ance recognises as being too warm.
Audible and visual signals will be acti‐
vated, for example,
– when the appliance is switched on
and the temperature in one of the
temperature zones differs greatly
from the set temperature,
– if a lot of room air enters the freezer
when food is being loaded, re-ar‐
ranged or taken out,
– when freezing large amounts of food
at once,
– when freezing fresh food which is still
warm,
– in the event of a power cut,
– if the appliance has a fault.
The alarm will stop and the the alarm
symbol  will go out when the temper‐
ature reaches the correct level again.
The sensor for the freezer section will
light up again constantly.
30
However, if the temperature in the
freezer remains above -18 °C for a
long time, check that the frozen food
has not started to defrost. If it has,
check that the food is safe to use
and if it is, then use it as soon as
possible or cook it before freezing it
again.
Switching the temperature alarm off
early
If the noise disturbs you, you can
switch the alarm off if you wish.
 Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The freezer section sensor on the con‐
trol panel and the alarm symbol  will
continue to flash until the temperature
is at the correct level.