Adjusting the interior fittings
Adjusting the door shelf / bot‐
tle shelf
Push the door/bottle shelf upwards,
then remove it by pulling it forwards
Replace the door/bottle shelf at the
required position. Ensure that it is se‐
curely pushed back into position.
Adjusting the bottle holder
The bottle holder can be moved left or
right to create more room for drink car‐
tons.
The bottle holder can be removed com‐
pletely (e.g. for cleaning):
Push the bottle shelf upwards, then
remove it by pulling it forwards
Pull the bottle holder upwards to re‐
move it from the rear edge of the bot‐
tle shelf.
40
Adjustable shelves / Adjusta‐
ble shelves with lighting
The LED lighting is located in the stain‐
less steel trim of the adjustable shelves.
You can illuminate the refrigerator sec‐
tion as you wish by moving the shelves.
If the lighting is not working, check
that the shelves are positioned in the
side supports correctly:
The shelves have metal discs (con‐
tacts) in the left-hand front corner
which supply power to the LED light‐
ing. Make sure when inserting the
shelves that the contacts click into the
shelf supports correctly.
Moving the adjustable shelves / ad‐
justable shelves with lighting
The shelves can be adjusted according
to the height of the food.
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from be‐
ing dislodged by mistake.