Display Brightness - Miele KFN 37432 iD Operating And Installation Instructions

Selecting further settings
 By touching the  or sensor you
can now select:
0: sensor tone off; door alarm off
1: sensor tone off; door alarm on
(after 4 minutes)
2: sensor tone off; door alarm on
(after 2 minutes)
3: sensor tone on; door alarm on
(after 2 minutes)
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the 
symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set‐
tings mode automatically after ap‐
proximately one minute.
34
Display brightness 
The display brightness can be adjusted
to suit lighting conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Altering the display brightness
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.