Fitting The Furniture Doors - Miele KFN 37432 iD Operating And Installation Instructions

Installing the appliance

Fitting the furniture doors

The furniture door must be at least
16 mm thick and not exceed 19 mm
thick.
The following gap dimensions must be
maintained:
– The gap between the furniture door
and the unit door above must be at
least 3 mm.
– The vertical gap between furniture
doors should also be about 3 mm.
The exact dimension will vary de‐
pending on the radius of the furniture
door edges.
If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted cor‐
rectly and not under tension.
88
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges. This can cause
subsequent functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not ex‐
ceed the maximum permitted:
Appliance
KFN 37432 iD,
KFNS 37432 iD
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
Upper Lower
door in door in
kg kg
17 12