Troubleshooting - Hunter Ernest Hemingway Series Owner's Manual

Problem: Nothing happens; fan does not move.
1. Turn power on, replace fuse, or reset breaker.
2. Check the plug connections in the switch housing.
3. Pull the pull chain to ensure it is on.
4. Remove the shipping bumpers.
5. Ensure that the fan is plugged into a suitable GFCI outlet.
Problem: Noisy operation.
1. Tighten the blade iron screws until snug.
2. Tighten the blade screws until snug.
3. Check to see if the blade is cracked. If so, replace all the blades.
4. Check and tighten the screws in the switch housing mounting
plate and in the upper and lower switch housing.
Problem: Excessive wobbling.
1. If your fan wobbles when operating, use the enclosed balancing
kit and instructions to balance the fan.
2. Tighten all blade and/or blade iron screws.
3. Tighten all skirt and base screws.
4. Make sure all three rubber feet are installed under the base.
Problem: Table wobbling.
1. Make sure that all fasteners are secure and that the table is on a level area
with a solid ground surface.
9 • Troubleshooting
If you need parts or service assistance, please call
888-830-1326 or visit us at our Web site at
http://www.Hunterfan.com.
Hunter® Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114
1
42746-01 • 04/26/07 • Hunter® Fan Company
Step Title