Completing Assembly - Hunter Ernest Hemingway Series Owner's Manual

Steps 7-1 - 7-2:
CAUTION: Do not attempt to assemble fan without all three pole
segments.
Note: Be sure there are no obstructions before lifting
the fan to complete assembly.
7-1. Being careful to not pinch any wires, lift the fan and
upper pole assembly (with assistance from at least
one other person) and place it onto the middle pole
segment. Align the window in the upper pole with the
window in the middle pole.
7-2. Connect the 3-pin plug connector from the fan to the
3-pin plug connector from the base. Push the wires into
the pole.
Window
Closed
Logo
Coverplate
Step 7-5:
7-5. Install the remaining screw behind the logo coverplate.
Securely tighten all screws.
7 • Completing Assembly
Hardware Needed:
Pole Screw
Screw
06549-01-247
(x 2)
11
42746-01 • 04/26/07 • Hunter® Fan Company
Steps 7-3 - 7-4:
7-3. Be sure no wires are pinched before
closing the window. Rotate the upper pole
o
segment 180 to align the screw holes and
close the window.
7-4. Align the holes with the logo coverplate
and securely install two screws.
Hardware Needed:
Pole Screw
06549-01-247
(x 1)
Step Title
Window
Open
Upper
Pole
Segment
Screw