Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hunter Gallery Edotion
Summary of Contents for Hunter Gallery Edotion
- Page 1 41878-01 • 05/18/04...
-
Page 2: Table Of Contents
8 • Completing Your Installation With or • To reduce the risk of fire, electrical shock, or motor damage, do not Without a Light Fixture......11 use a solid-state speed control with this fan. Use only Hunter speed 9 • Operating and Cleaning controls. - Page 3 Understanding Mounting Hunter’s patented mounting system provides you maximum installation fl exibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angle mounting. e steps in this manual include instructions for both mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Do not over tighten. Steps 2-3 – 2-5 Flat Washer 3” Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 41878-01 • 05/18/04 Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
U-shaped 3-8. Raise the fan and place the hook on the ceiling plate through the Hole U-shaped hole in the rim. WARNING: Fan may fall if not assembled as directed in these installation instructions. Hunter Fan Company 41878-01 • 05/18/04... -
Page 7: Securing Fan To Secondary Support System
4-7. Coil up the excess cable. 4-8. Return to the fan so you can complete the fan wiring. Step 4-1 Steps 4-6 – 4-7 Steps 4-2 – 4-3 Steps 4-4 – 4-5 Support Brace Outlet Box Braided Ceiling Cable 41878-01 • 05/18/04 Hunter Fan Company... -
Page 8: Wiring The Fan
CAUTION: Be sure no bare wire or wire strands are visible after making connections. 5-6. Push all wires and wire nuts back through the ceiling plate hole into the outlet box. Wire Nut Step 5-4 Hunter Fan Company 41878-01 • 05/18/04... -
Page 9: Installing The Canopy And Canopy Trim Ring
2. Press fi rmly on opposite sides of the ring towards the canopy. e tabs will fl ex out releasing the trim ring from the canopy. Step 6-3 Steps 6-4 – 6-5 Canopy Screw 41878-01 • 05/18/04 Hunter Fan Company... -
Page 10: Assembling The Blades
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the Step 7-1 (Detail) blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. -
Page 11: Completing Your Installation With Or Without A Light Fixture
8 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. is feature gives you the option of installing the fan with OR without the included light fixture. - Page 12 8-8. e last installation step when installing the light fixture is to Connector insert each glass shade in a shade cup and rotate clockwise until Detail secure. 8-9. Install medium base incandescent light bulbs, maximum 60 Watts. Housing Assembly Screw Step 8-8 Hunter Fan Company 41878-01 • 05/18/04...
- Page 13 Install and tighten the two screws you removed previously from the other switch housing. 10. Carefully place the capacitors in the switch housing. 11. Continue with Step 8-6 on page 12. 41878-01 • 05/18/04 Hunter Fan Company...
-
Page 14: Operating And Cleaning Your Ceiling Fan
To Change Airfl ow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch Hunter Fan Company 41878-01 • 05/18/04... -
Page 15: Troubleshooting
3. Turn power off , support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our WEB site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 41878-01 • 05/18/04 Hunter Fan Company...