Table of Contents
Advertisement
CHAPTER 4
OPERATION
4.1
Power ON/OFF
4.2
Appearance and Functions of Operator Panel
4.3
ADF Paper Chute Setting (E type only)
4.4
Document Settig Method
4.5
Removing Jammed Documents (E type only)
4.0
Thick Paper Documents Feeding (E type only)
4.1
Power ON/OFF
The power switch is on the front of the image scanner. (See Figure 4.1.)
By pushing
the side of the switch marked "
1 "
power is connected
and the power
lamp on the operator
panel is lit. By pushing the side of the switch marked
" 0 ",
power is disconnected
and the power lamp on the operator
panel goes out. (In Figure
4.1, power is not applied.)
Figure
4.1
Power switch
4.2
Appearance and Functions of Operator Panel
Figure
4.2 to 4.5 show the operator
panel for each model, Table 4.1 lists switch
names and functions,
and Table 4.2 lists indicator names and functions.
60FH5020E-01
4-1
Advertisement
Table of Contents
