Fujitsu M3096E+ Operator's Manual page 37

AnFling the document sheets
1. Place the document face down on a flat surface, with its upper end to the left. (a)
2. Lift the sheets (maximum 4 mm for A4 or smaller, maximum 2 mm for larger
than A4) with both hands.
3. Hold the sheets tightly with your left hand and bend the sheets as shown in (b).
4. Grip tightly with your right hand, loosen the grip of your left hand, and
straighten the sheets as shown in (c).
5.
Repeat operations 3 and 4 as often as necessary.
(a) (b) (cl
upper end
Handling sheets
15 - 20mmJ
Handling sheets
Take a 2 to 4 mm thickness of sheets.
Lightly hold both ends with both hands. Bend
the sheets as shown. Hold the sheets tightly with both hands then straighten the
sheets. The sheets swell and air is introduced between them. Repeat this operation
two or three time. Turn the sheets through 90" and repeat the entire operation.
SOFH5020E-01
4-11