Table of Contents
Advertisement
Table 4.2
Indicator
names and functions
Indicator
name
Power lamp
Alarm lamp
Jam lamp
Ready lamp
Resolution
lamp
Line/Photo
lamp
Half-tone
lamp
Density lam] P
-
Lamp color
Amber
Red
Red
Green
Green
Green
Green
Green
Function
Lights when power is applied.
Lights when a device failure occurs. If this lamp lights,
urn the power off then on again. Then execute reading.
Lights when a jam occurs in the auto feed mode. If this
lamp lights, remove jammed paper and turn off this lamp
,y pushing the Stop switch. Then start reading.
Lights when the image scanner becomes ready in the mode
where reading is started with the Start switch (i.e. manual
start mode) and goes out when the Start switch is pressed
snd reading is started.
The lamp corresponding
to the selected resolution
lights
each time the Resolution
switch is pressed.
When the
main unit specifies a resolution
the image scanner
zomplies accordingly.
I'he read processing
lamp corresponding
to the setting of
the Document switch lights.
Line:
Compensate
the reflection
of the background
of the
document.
Photo:
Scanner memorizes
the white target of it as the
white level.
When power is applied and the initial state is specified,
Line is selected.
When the host computer
has specified the
document, the scanner complies accordingly.
When half-tone reading has been selected with the Half-
tone switch (dither processing),
this lamp lights.
When the
Automatic Separation
text and photo reading has been
selected with Half-tone
switch, this lamp blinks.
This
lamp is not lit after powered on without IPC option. This
lamp blinks after powerd on with IPC option. When the
host computer
specifies Half-tone,
the scanner complies
accordingly.
Each time the Density switch is pressed, the Density lamp
lights.
Dark output (for light document image):
Select the Dark lamp.
Light output (for dark document image):
Select the Light lamp.
When power is applied or the initial state is specified, the
Normal lamp lights. If the DTC option is installed,
the
Auto lamp lights when power is applied.
When the host
computer
specifies density, the scanner complies
accordingly.
4-4
50FH5020E-01
Advertisement
Table of Contents
