Table of Contents
Advertisement
2.5
Carrier Fixing Bracket Removal
At first, remove
the carrier
fixing bracket
from the base of the scanner.
This
bracket fixes the carrier
unit for transportation.
When the power is turned on with fixing bracket,
the alarm lamp turns on. Then,
turn off the power once disconnect
the power cable and remove the bracket.
CAUTION
Do not set the scanner turn over and raise.
Q
Set the scanner on the edge of the desk in view of the base of ADF section.
@ Confirm
with viewing from the lower side that the carrier
fixing bracket
is
attached.
Carrier
fixing bracket
2-8
50FH5020E-01
Advertisement
Table of Contents
