Troubleshooting; Technical Data - Lupine Piko Owner's Manual

9

Troubleshooting

Problem Cause
The light does not come on  Extremely discharged battery.
and the power LEDs do not
flash when the battery is
plugged into the lamp.
 Battery not plugged into the
light or not plugged in
properly.
With the battery plugged in,  Faulty LED unit.
the power LEDs do not come
on, but the PCS LEDs flash.
The Power LEDs do not stay on  Discharged battery.
for as long as they should. Old battery.

Very low ambient

temperature.
 Faulty charger.
Unsuitable battery.

4 4 Piko
Solution
 Charge the battery.
 Check all plug contacts.
 Replace the LED unit.
 Charge battery.
Replace battery.

Keep battery warm.

 Replace charger.
Use original Lupine battery.

Weight:
Piko lamp: 55 g
Piko 3 with battery: 180 g
Piko X with battery: 210 g
Piko U3 with battery: 180 g
Light output: Battery life:
10 W 100 %: 750 lumen 2 hours
3.5 W 35 %: 300 lumen 5 hours 30 min.
1 W 10 %: 110 lumen 19 hours
0.5 W 5 %: 60 lumen 40 hours
Battery life varies according to battery age and condition,
as well as ambient temperature.
Charging time:
3 hours
Lens beam angle:
22 °
Charger Wiesel:
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current: up to 1.2 A
Compatible batteries: Li-Ion 7.2 V
Display: charging control via one LED
Plug adapters: D/Euro, UK, USA

Technical data

Default setting
Battery capacity/nominal voltage:
2.5 Ah / 7.2 V Li-Ion
Operating temperature:
-25 °C to +70 °C
Piko 45
10