Lupine Piko Owner's Manual page 17

2
Mounting
Handlebar mounting:
For mounting the Piko on a handlebar, an
optional CNC Quick Release mount is available
for 25.4 mm and 31.8 mm diameter. Have a
look at www.lupine.de (Art.No. 225 for 25.4 mm/
Art.No. 231 for 31.8 mm)
1
Put the clamp around the
handle bar and close.
32 Piko
For mounting, please first loosen the screws on the
helmet mount/headband. Only one screw and the
additionally supplied black o-rings are required
for mounting the Piko on the bar. Change the blue
o-ring to a black one on the screw. Put the screw
through the hole of the handlebar mount, then put
the second black o-ring onto the tip of the screw.
The order of o-ring, screw, o-ring, handlebar mount,
lamp must be strictly adhered to as shown in the
picture in order to ensure flawless functionality.
After that, tighten the screw slightly first, then secu-
rely. Cover the open thread with the included plug.
2
How to mount the Piko on a handlebar
can also be watched in a video provided
on our website in the support section!
Frame mounting
the battery:
With the flexible velcro strap, the
battery may also be mounted on
the frame.
3
Note: Basically, you may use the
of the type (NiMH or Li-Ion). Usually, the battery life of old batteries is still accep-
table, extraordinary dimming abilities provide good light even in case of a very
weak battery.
1
Piko lamp with all Lupine batteries irrespective
2
4
2
Piko 33