Pride Mobility Jazzy 1120 Owner's Manual page 10

I I I .
UTILITY TRAY
The utility tray is located on the rear of your Jazzy. A section of the utility tray is exposed through the body shroud.
The rest of the utility tray is located underneath the rear door. The utility tray consists of the ammeter, the battery
charger cord, the main circuit breaker, the full lighting harness connectors (optional equipment), and the controller
harness connectors. See figures 3 - 6.
n Ammeter: The ammeter displays the charger’s current output in amps. See figure 3. For more information,
see VIII. “Batteries and Charging.”
n Battery charger power cord outlet: This cord is used whenever your battery needs recharging. See figure 3.
n Main circuit breaker: The main circuit breaker is a safety feature built into your Jazzy 1120. See figure 5.
When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker
trips to prevent damage to the motors and the electronics. If the circuit trips, allow your Jazzy to “rest” for
approximately one minute. Next, push in the circuit breaker button, turn on the joystick controller, and continue
normal operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride provider.
n Full lighting harness connector (optional): This is where the optional lighting harness connects to the
controller. See figure 6.
n Joystick controller harness connectors: This is where the joystick connects to the motors, batteries, and charger.
See figure 3.
STANDARD HEADLIGHT/
TAILLIGHT CONNECTOR
Figure 5. Main Circuit Breaker
10
T H E J A Z Z Y
MAIN CIRCUIT BREAKER
1 1 2 0
FULL LIGHTING HARNESS CONNECTOR
Figure 6. Full Lighting Harness Connector
Jazzy 1120