Related Manuals for Martin Audio C10.1C
Summary of Contents for Martin Audio C10.1C
- Page 1 PREMININARY INFORMATION CS10, CS10T, C10.1R, C10.1C User’s Guide The Martin Experience All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 2 It is suggested that you retain the original packaging so that the system can be repacked at a future date if necessary. Please note that Martin Audio and its distributors cannot accept any responsibility for damage to any returned product through the use of non-approved packaging.
- Page 3 RAL9010 white with a 20% gloss finish to blend in with most white suspended ceilings. The subwoofer is fixed via three wrap-around brackets. CS10 specifications All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 4 Voltage & power settings available Model Direct (200W AES 800W pk) CS10 8 ohms All material © 2007. Martin Audio Ltd. Subject to change without notice. 100V operation 70V operation (Transformer versions – suffix T) 150W, 75W 150W, 75W, 37W...
- Page 5 Check with the architectural authorities before attaching these ceiling loudspeakers to the building structure The CS10 subwoofer must be fixed to a load-bearing part of the building structure via the three right-angled fixing brackets. All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 6 Do not allow the CS10 or CS10T to be supported by a suspended ceiling grid. These ceiling loudspeakers must be attached to a secure part of the building. All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 7 The CS10 input and loop connector must be fireproofed using the steel cover and screws provided. This cover has a 19mm (0.75”) knockout and a clamped cable entry. All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 8 Atlas or Lowell. The C10.1R fits a rectangular enclosure whilst the C10.1C fits a cylindrical enclosure. Nominal spacing for smooth broadband coverage The C10.1R and C10.1C have a very controlled 90º dispersion giving a nominal spacing of 2 x (ceiling height – 1.4m (4’7”)). C10.1R specifications...
- Page 9 Suitable rectangular Atlas enclosures include the Q4412, the Q4612, the Q4712 and the Q4812 – all with the Atlas 164-12A grille or the Lowell DX1312, DX1512, DX1612 or DX1712 and their associated grilles. All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 10 C10.1C specifications C10.1C dimensions All material © 2007. Martin Audio Ltd. Subject to change without notice.
- Page 11 Taps ratings are printed on the transformer winding cover next to each push-fit tag (arrowed). All material © 2007. Martin Audio Ltd. Subject to change without notice. 100V operation 70V operation (Transformer versions –...
-
Page 12: Installation Notes
Amplifier power input is via a 4-pin rising clamp plug providing + and – Inputs and + and – Loop Through connections. All material © 2007. Martin Audio Ltd. Subject to change without notice. As a C10.1RT or C10.1CT Input & Loop through... - Page 13 Martin Audio. Martin Audio is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied. This warranty does not affect your statutory rights. All material © 2007. Martin Audio Ltd. Subject to change without notice.
Need help?
Do you have a question about the C10.1C and is the answer not in the manual?
Questions and answers