Martin Audio SX Series User Manual
Hide thumbs
Also See for SX Series:
- User manual (106 pages) ,
- User manual (106 pages) ,
- User manual (21 pages)
Related Manuals for Martin Audio SX Series
Summary of Contents for Martin Audio SX Series
- Page 1 SX215 User Guide Copyright © 2025 Martin Audio Limited Publication date 2025-04-11...
-
Page 2: Table Of Contents
SX215 User Guide Table of Contents Introduction ............................3 Optional accessories ..........................4 Castor kit ............................4 Weatherised kit ..........................4 Transit cover ........................... 4 M10 eye bolt ........................... 4 Wind-up telescopic pole ........................4 Connections ............................6 Link cable ............................6 Fitting castors ............................ -
Page 3: Introduction
M20 threaded plate facilitates pole-mounting of Martin Audio full-range enclosures. Four ergonomic handles assist handling and installation, and the drivers are protected by a coated steel grille with an acoustically transparent fabric backing. -
Page 4: Optional Accessories
16 M8 hex head screws ▪ 16 flat washers ▪ 16 spring washers ▪ Optional accessory for Martin Audio 15" and 18" ▪ subwoofers (SX115, SXC115, SXCF115, SX215, SX118, SXC118, SXCF118, SX218, SXP118, SXP218, Blackline X115, X118, X218, XP118) Product code: HTKCT06 ▪... - Page 5 SX215 User Guide Wind-up handle for raising speakers to required height ▪ Rugged steel construction ▪ Locking screw and safety button ▪ 35 mm diameter to fit standard portable speaker top- ▪ hat fittings M20 threaded base fitting ▪...
-
Page 6: Connections
SX215 User Guide Connections The SX215 has two NL4 sockets on the back panel, labelled INPUT and LINK. Despite the labels, the two sockets are the same, so you can use them either way round. For both sockets, the pins connect as follows: Pins 1+/1–... -
Page 7: Fitting Castors
SX215 User Guide Fitting castors We supply swivel castors in sets of four with all required Make sure you use the bolts from the kit, not the fittings. The product code for this optional accessory is screws from the cabinet. WHEELKIT (page To fit the castors 1. -
Page 8: Flying A Single Sx215
To fly individual SX215 subwoofers from ceilings, trusses recommend five eye bolts: four to fly the subwoofer or poles, use Martin Audio M10 shouldered eye bolts (part and one as a redundant safety bond. number HTKCT06) and appropriately rated steel ropes or chains. -
Page 9: Pole Mounting
The SX215 has an M20 top-mounted thread plate for 2. Screw the threaded pole into the M20 plate until installing a pole. secure. The Martin Audio wind-up telescopic pole ASF20071 (page 4) supports speakers with a top hat fitting up to 35 kg (77.2 lbs), such as CDD-LIVE, XD, WPM and MLA Mini. -
Page 10: System Controllers
SX215 User Guide System controllers For system controllers, we recommend the Martin Audio DX0.4 or DX0.6, or for larger installations the DX4.0. If you are using an iKON amplifier, you don't need a system controller as these amplifiers have on-board system processing. -
Page 11: System Design
System design To design your system and decide on the best positions To download the Revit family for speakers and subs, we recommend Martin Audio 1. Visit our website martin-audio.com. Display 3 software, which we provide as a free download from our website. -
Page 12: Other Sx Subwoofers
SX215 User Guide Other SX subwoofers The SX Series subwoofers are a range of sub bass The range includes two powered, Dante equipped enclosures designed to complement Martin Audio full subwoofers. These are an ideal partner for CDD‑LIVE. The range systems. The range encompasses installation and... -
Page 13: Sx215 Specification
SX215 User Guide SX215 specification Type Dual driver, direct radiating subwoofer Frequency 45 Hz – 100 Hz ± 3 dB, –10 dB @ 36 Hz response Drivers LF: 15” with 4” voice coil, ferrite motor system Rated power 1,600 W AES, 6,400 W peak Recommended iK42 amplifier... -
Page 14: Sx215 Technical Drawing
SX215 User Guide SX215 technical drawing The drawing below shows the SX215 with the optional To load this drawing into CAD software, see castors fitted. files (page 11). -
Page 15: Troubleshooting
Check the sound quality with headphones at the amplifier or preamp. Technical support For technical support, contact either your supplier or ▪ Martin Audio technical support. For Martin Audio technical support, go to our website ▪ martin-audio.com and select Support > Support Contacts. Service For service details, go to our website martin-audio.com... - Page 16 +1 323 381 5310 www.martin-audio.com Martin Audio, the Martin Audio logo and Hybrid are registered trademarks of Martin Audio Ltd. in the United Kingdom, United States and other countries; all other Martin Audio trademarks are the property of Martin Audio Ltd.
Need help?
Do you have a question about the SX Series and is the answer not in the manual?
Questions and answers