Registering device control script files
Use EPSON TMNet WebConfig to register device control scripts on this product, following the
procedures below.
This registration is used when registering device control script files, such as serial
communication devices, using ePOS-Device.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Add/delete].
The "Control script" screen is displayed.
3
Select [Browse...], and specify the control script you want to register,
then click [Add].
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT's IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".
Chapter 2 Setup
2
93