Os Initial Settings - Epson TM-T88V-DT Technical Reference Manual

OS Initial Settings

The following explains the procedures for setting the OS when you turn on the power for this
product for the first time.
 When performing setup for the OS, you need a display and a keyboard.
 Connect the display when this product is off.
1
Check that the product's power is not on, and connect the display,
keyboard, and mouse.
2
Turn on the product.
3
The login screen is displayed. Input the password.
The initial settings are as follows.
Windows Embedded POSReady 7
Windows Embedded POSReady 2009
4
The OS desktop is displayed. Select [Start], then [Control Panel], and
[Date and Time]. The "Date and Time" window is displayed. Set the time,
date, and the timezone.
If you connect the display when this product is on, data may not be properly displayed.
The display can use either the VGA or the Display Port. If you are using dual
display, perform separate settings.
For detail, refer to "Settings for Dual Display" on page
When you turn on this product's power for the first time, the Windows Embedded
POS Ready 2009 setup screen is displayed for a while.
OS
You can also set the date, time, and the timezone using EPSON TMNet WebConfig.
120.
User name
EPSON-USER
Administrator
Chapter 2 Setup
Password
T88V-DT
T88V-DT
73
2