Paper Specifications
Paper types
Form
Size
Roll paper diameter
Roll paper core
Roll width when taken up
Paper width
Specified roll paper type
Specified original paper type
Paper must not be pasted to the roll paper core.
The remaining amount of the roll paper when a roll paper near-end is detected differs
44
80 mm width paper printing
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
80 + 0.5/-1.0 mm
79.5 ± 0.5 mm
NTP080-80
TRP080-80H
TF50KS-E, TF60KS-E (NIPPON Paper Industries Co., Ltd.)
PD150R, PD160R, PD190R (OJI Paper Mfg. Co., Ltd.)
P220AGB-1 (Mitsubishi Paper Mills Limited.)
P300, P310, P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec Paper Flensburg GmbH)
KT55F20, KT48F20 (Koehler Paper Group)
depending on the core type.
58 mm width paper printing
58 + 0.5/-1.0 mm
57.5 ± 0.5 mm
NTP058-80
TRP058-80H