Printer Settings
You can register logos in the NV (non volatile) memory area in the printer unit and print them.
You can also directly print raster format image data as logos without registering them on the
product.
• Use TM-T88V Utility to register logos.
Register Procedures
Follow the steps below to register logos.
It is recommended to write all logos together in the printer when you register more than one
logo.
1
Select [Start] - [All Programs] - [EPSON] - [TM-T88V Software] -
[TM-T88V Utility].
2
Select [Storing Logos], and then click [Add].
Chapter 2 Setup
2
109